Home / English / News / UV screen printing and hot-foil stamping in one single step

UV screen printing and hot-foil stamping in one single step

New Sakurai in-line hot foil stamper at ESC. As specialist for particularly sophisticated print tasks ESC is actually offering a new time- and cost-saving solution for finishing UV-varnished screen prints with metallized hot foil. The in-line hot foil stamper Sakurai LQM Evolution is suitable for all graphic, packaging, automotive, appliance and plastic card applications etc.

Screen printing, drying, hot foil stamping and stacking in one production process. Simply and quickly the user achieves high-quality prints with amazing flat, tactile or 3D effects. The LQM Evolution is designed to be fully integrated into every Sakurai screen printing line, installed after the dryer and before the stacker. The job setting is very easy and the machine can be operated by less experienced staff. No more need for dies and the foil waste is minimized. After the image has been printed as UV-varnish on the substrate and then dried, the foil is applied exactly only on the necessary parts, meaning the printed area.

Via touchscreen the operator can enter such parameters as foil application temperature, foil application pressure, substrate length, number of decoration areas or indexing front to back (multi foil application). The machine is also equipped for remote teleassistance and is able to handle sheets with a max. size of 520 mm x 760 mm (model LQM 76) or 1050 mm x 760 mm (model LQM 105). Apart from partial foil application the machine is equipped with two more modes: The continuous mode for foiling the complete surface as well as the bypass function to carry out jobs without foil stamping. This mode allows the sheet to pass through at the same speed as the press, acting purely as a transport mechanism.

The LQM Evolution can also be integrated into existing Sakurai cylinder screen printing lines, opening up the possibility for many production plants to improve their versatility or their level of specialization and to generate profitable growth.

  • Obecnie 0 z 5.
  • 1
  • 2
  • 3
  • 4
  • 5
Ocena: 0/5 (0 ocen/y)

Dziękujemy za ocenę!

Twoja ocena już została uwzględniona. możesz oceniać tylko raz!

Twoja ocena została zmieniona, dziękujemy za ocenę!

Nie masz uprawnień do pisania komentarzy. Zaloguj się.


The doors to FESPA Global Print Expo and European Sign Expo 2021, Europe’s leading exhibitions for speciality print and signage, will open in just a few days (12 – 15 October 2021 at the RAI, Amsterdam, The Netherlands). For the first time since Spring 2019, FESPA is welcoming its communities of print service providers and sign makers back to a live event, with a focus on bringing colour back after 18 extraordinary months for these industries.

Elitron will be showcasing the following: Kombo SD+ 31.20: multi-function, digital cutting table with full range of cutting tools for all your digital finishing requirements; Kombo SDC+ 31.20: multi-function, flexible, digital conveyor cutting table with full range of cutting tools for both roll and rigid media and others Elitron Innovations for 2021.

Under the heading ‘New beginnings. New opportunities’, Agfa celebrates the gradual ‘reopening’ of the world and the occasion to present its updated range of inkjet printing solutions live to the European graphic industry at FESPA in Amsterdam (12-15 October).